Skip to main content
Africa · Central Africa

Chad: Plants for Gum Arabic, Sesame, Rice and Milk

See which gum arabic, sesame, rice and dairy plants are listed for Chad, and how a landlocked country with an arid north shapes each type of project.

  • 11 products in 7 categories, listed for Chad
  • Engineering and manufacturing scope confirmed in the technical proposal

Kadali Africa Ventures Limited has offices in Accra, Ghana and Kano, Nigeria, and no office in Chad; enquiries from Chad are handled from the Accra office.

Processing in Chad

Acacia gum, sesame, rice and pastoral milk: Chad's processing opportunities

Chad is a landlocked country, and its climate runs from arid in the north, through semi-arid conditions, to a tropical wet-dry climate in the south. Millet and sorghum are major food crops, while cotton, sesame, rice and maize are among the crops with export potential. Chad also produces gum arabic, an extract of Acacia trees that is collected, sorted and cleaned before it reaches food and beverage ingredient markets, and livestock keeping is an important part of the rural economy.

Each of these streams has a clear processing route. Gum arabic needs cleaning, grading and dissolving, with spray drying to make a free-flowing powder. Sesame is cleaned, dried and pressed for oil, leaving a cake usable as feed. Paddy is parboiled and dried before milling, and rice development projects target the Mayo-Kebbi Ouest and Tandjile regions. Milk from herds can be evaporated or spray dried into a storable powder, an option that matters where fresh milk travels poorly in the heat.

Typical buyers would be exporters and cooperatives wanting to add value before shipping, oilseed processors serving regional food markets, and small dairy or ingredient makers. Any project needs to be checked against real supply and the difficult logistics of a landlocked country.

Central Africa

Products Relevant to Chad

11 of the 73 products in the catalogue are listed for Chad, in 7 categories: Herbal, Botanical & Nutraceutical Extraction (1), Starch, Flour, Edible Oil & Food Processing (1), Drying & Dehydration Systems (4), Cocoa, Shea, Palm Oil & Oilseed Processing (1), Cereals, Tubers & Sugar Processing (1), Specialty African Botanical & Natural Ingredients (2), Specialty Food, Beverage & By-Product Processing (1). The plants for Chad’s own raw materials come first. A listing is a catalogue listing, not a statement of demand or supply; the final configuration depends on your raw material, target product and capacity.

Gum arabic

Gum arabic is an extract of Acacia trees, and cleaning, dissolving and spray drying is a processing route to a more uniform powder for ingredient buyers; gum processing is worth discussing for gum collected in Chad.

Sesame

Sesame is among the crops with export potential, and cleaning, dehulling and pressing is a processing route that lets seed be turned into oil locally; sesame oil products are worth discussing for this raw material.

Rice

Paddy from rice-growing areas such as Mayo-Kebbi Ouest and Tandjile benefits from parboiling and uniform drying, which improves milling yield and gives a more stable grain; parboiling and drying products are relevant to this raw material.

The rest of the catalogue

More Plants and Equipment, by Category

The other 62 products of the 73-product catalogue, by category. A product that is not listed for Chad is not ruled out: tell us your raw material and target product. Request a technical proposal

Planning a project in Chad

What to Settle Before You Ask for a Proposal

  • Landlocked logistics

    Chad has no coastline, and most imported goods are reported to come through the Cameroonian corridor, with the port of Douala more used than Lomé, then travel overland, so plant sections should be planned in transportable sizes and freight allowed for.

  • Heat, dust and water

    The north is arid and the centre semi-arid, so design for filtered air, covered process areas and low water use, and consider solar-assisted drying to lower fuel needs where sunshine is strong.

  • Seasonal harvests and dispersed suppliers

    Oilseeds, paddy and gum are harvested in defined seasons and may come from many small producers, so storage and collection points are crucial, and a modular plant that runs through the season is better than an oversized one.

Industries to read next

  • Agro & Food Processing Solutions

    Oilseeds, rice, gum arabic and milk are the main food and ingredient streams, and the mapped sesame, parboiling, gum and dairy products are candidates for processors adding value within Chad.

    Read the industry page
  • Industrial Drying & Dehydration Solutions

    The north is arid and the centre semi-arid, which suits solar-assisted drying for grain and oilseeds, while hot-air and spray dryers support steadier, higher-volume processing of gums and dairy.

    Read the industry page
From enquiry to delivery for Chad

From Enquiry to a Running Plant

  1. 1Engineering
  2. 2Manufacturing
  3. 3Installation
  4. 4Commissioning
Working with us from Chad

Enquiries for Chad Projects

Kadali Africa Ventures Limited, Accra

421, University Road
Sowutuom
Accra, Ghana

FAQ

Questions About Plants for Chad

How is gum arabic processed for ingredient buyers in Chad?

Raw gum is cleaned and sorted, dissolved, filtered and can then be spray dried into powder. This turns raw nodules into a more uniform ingredient, and a proposal can discuss the size of the line against the gum volume you can collect.

Can sesame oil be pressed locally in Chad?

Pressing involves cleaning, dehulling where needed, pressing and filtering the oil, and the cake can be kept as feed. A proposal discussion can look at your seed volume, power supply and the oil quality you want before any equipment is considered.

Is dairy powder production realistic from pastoral milk in Chad?

It can be technically possible, but milk is collected from scattered herds and spoils fast in heat, so cooling and collection routes are as important as the evaporator and dryer. A proposal should look at the whole supply chain first.

Does Kadali Africa Ventures have an office in Chad?

Kadali Africa Ventures Limited has offices in Accra, Ghana and Kano, Nigeria, and none in Chad. Engineering and manufacturing scope for each product is confirmed in the technical proposal.

What should I send for a Chad project proposal?

Use the form on this page. Give your raw material, the product you want to make, the capacity and its basis (for example kg per hour or tonnes per day) and your site.

Planning a project in Chad?

Send your raw material, target product and capacity. We will come back with the process route and equipment scope for your project.

Request a technical proposal

Tell us about your Chad project

Only name, email, phone and industry are required. The more you share about raw material and capacity, the more precise our proposal.

Your Details
Company
Project
Product & Process
Utilities Available
Compliance Required
Existing Plant (if any)
Anything Else

By submitting this form you confirm that Kadali Africa Ventures Limited may use the details you provide to respond to your enquiry. See our Privacy Policy for how your data is handled.

Prefer to talk? +233 201 559 419