Skip to main content
Cattle Feed Plant
Starch, Flour, Edible Oil & Food Processing

Cattle Feed Plant

Part of the Kadali Africa Ventures catalogue. Send your raw material, target product and capacity for a technical proposal. Request a quote →

Cattle Feed Plant Starch, Flour, Edible Oil & Food Processing

Cattle Feed Plant

Kadali Africa Ventures supplies cattle feed processing plants and machinery to buyers across Africa, for mash and pelleted feed for dairy cattle, beef and fattening cattle, calves, sheep and goats. We supply complete turnkey feed lines, from design to commissioning, as well as individual machines to start, expand or upgrade an existing feed mill. Plant capacity is configured to your formulation, throughput and running hours, and spares for the machinery are held in Lagos and Kano (Nigeria) and Accra (Ghana).

A cattle feed line receives and cleans raw materials such as maize, sorghum, brans, oilseed cakes, molasses and minerals, grinds the grains and cakes, then batches and mixes them to formulation, with liquid molasses added in the mixer where the formulation calls for it. The mix can be bagged directly as mash, or conditioned with steam and pressed into pellets, which are cooled, screened and bagged. Pellets handle and store better than mash and reduce sorting and waste at the trough, while mash is the simpler and lower-cost route. Feed quality depends on formulation accuracy, grinding, mixing uniformity, pellet durability and dust control, so each line is laid out around the feed forms and capacity you need. Every enquiry gets a reply within 24 hours, service is provided within 48 hours, and machinery carries a 12-month warranty against any manufacturing defect.

Cattle Feed Plant at a glance

Raw material
Mash and pelleted feed
Plant outputs
Cattle mash feed; Pelleted cattle feed; Calf starter and grower feed; Sheep and goat feed
Process route
Raw-Material Intake & Cleaning → Grinding → Batching & Mixing → Steam Conditioning → Pelleting → Cooling & Screening → Bagging
Main uses
Dairy cattle feed production; Beef and fattening (feedlot) cattle feed; Calf starter and grower feed
Supplied to
Processors across Africa, from the Kadali Africa Ventures offices in Accra (Ghana) and Kano (Nigeria)
To get a proposal
Send your raw material, target product, capacity and country; every enquiry gets a reply within 24 hours

Technical Specifications

ProductCattle Feed Processing Plant & Equipment
Feed FormsMash and pelleted feed
Scope of SupplyComplete turnkey lines (design to commissioning) or individual machines
Raw MaterialsMaize, sorghum, brans, oilseed cakes, molasses, minerals and premixes as per your formulation
Process ModulesRaw-material intake and cleaning, grinding, batching and mixing (with molasses addition), steam conditioning, pelleting, cooling, screening, bagging
Plant CapacityConfigurable based on process requirement
UtilitiesPower and steam; configurable based on process requirement
AutomationConfigurable based on process requirement
Spares SupportSpares held in Lagos and Kano (Nigeria) and Accra (Ghana)
Response & ServiceReply within 24 hours; service within 48 hours
Warranty12 months against any manufacturing defect

Typical Process Route

  1. 1Raw-Material Intake & Cleaning
  2. 2Grinding
  3. 3Batching & Mixing
  4. 4Steam Conditioning
  5. 5Pelleting
  6. 6Cooling & Screening
  7. 7Bagging
1

Raw-Material Intake & Cleaning

Maize, sorghum, brans, oilseed cakes and other formulation ingredients are received, checked for moisture and cleaned of foreign matter before storage and milling.

2

Grinding

A hammer mill grinds grains and cakes to the particle size suited to the feed form and the animals being fed.

3

Batching & Mixing

Ingredients, minerals and premixes are weighed to the formulation and mixed until uniform; liquid molasses can be added in the mixer. For mash feed, the mixed feed goes straight to packing.

4

Steam Conditioning

For pelleted feed, the mash passes through a conditioner, where steam is added to soften and bind the mix before pressing.

5

Pelleting

The pellet mill presses the conditioned mash through a die to form cattle feed pellets.

6

Cooling & Screening

Hot pellets are cooled, and a screener removes fines, which are returned to the line.

7

Bagging

The finished mash or pellets are weighed and bagged for dispatch.

Major Plant Equipment

  • Raw-material intake hopper and pre-cleaning screen
  • Bucket elevators and conveyors
  • Hammer mill
  • Batching scales
  • Feed mixer with molasses addition
  • Steam conditioner
  • Pellet mill
  • Pellet cooler
  • Rotary screener
  • Packing scale and bag-closing machine
  • Dust collection system (cyclone and bag filter)
  • Steam boiler for conditioning
  • Electrical control panel

Plant Output

Cattle mash feedPelleted cattle feedCalf starter and grower feedSheep and goat feed

Applications

  • Dairy cattle feed production
  • Beef and fattening (feedlot) cattle feed
  • Calf starter and grower feed
  • Sheep and goat (small ruminant) feed
  • On-farm feed production for dairy farms and ranches
  • Commercial feed mills supplying livestock farmers

Key Features

  • Mash and Pellet Feed

    One supplier for mash and pelleted cattle feed, either as separate lines or as one line that makes both forms.

  • Complete Line or Individual Machines

    Take a turnkey feed line from design to commissioning, or buy only the machines you need to add capacity or replace equipment in an existing mill.

  • Molasses and Mineral Addition

    Liquid molasses, minerals and premixes are added at the mixing stage to suit the formulation.

  • Spares Held in Lagos, Kano and Accra

    Spares for the machinery are stocked in Nigeria and Ghana, so replacement parts do not have to wait for an overseas shipment.

  • 24-Hour Reply, 48-Hour Service

    Every enquiry gets a reply within 24 hours, and service is provided within 48 hours.

  • 12-Month Warranty

    Machinery is covered for 12 months against any manufacturing defect.

Frequently Asked Questions

Who supplies cattle feed plants in Nigeria and Ghana?
Kadali Africa Ventures (KAV) supplies cattle feed processing plants and machinery to buyers across Africa, as complete turnkey lines or individual machines. KAV has local offices in Accra (Ghana) and Kano (Nigeria) and holds spare parts in Lagos, Kano and Accra.
Does Kadali Africa Ventures supply complete cattle feed plants?
Yes. We supply complete turnkey cattle feed lines, from design to commissioning, for mash and pelleted feed. We also supply individual machines if you only need part of a line.
What capacity of cattle feed plant can you supply?
Capacity is configured to your requirement. Send your target output per hour, the hours the mill will run each day and the feed forms you want, and the line is sized to that.
Should I produce mash or pelleted cattle feed?
Mash is the simplest and lowest-cost route and needs no steam conditioning. Pellets need a conditioner, pellet mill and cooler, but they handle and store better and reduce sorting and waste at the trough. The choice depends on your animals, your customers and your budget, and one line can be laid out to make both.
Which raw materials go into cattle feed?
Typical ingredients include maize, sorghum and other grains, brans, oilseed cakes such as cottonseed, groundnut or soybean cake, molasses, minerals and premixes. The formulation, and the raw materials you can buy through the year, shape the grinding and mixing sections.
What should I decide before planning a cattle feed mill?
Settle the animals and production stage (dairy, beef, fattening, calves or small ruminants), the feed forms, the formulation and the raw materials available through the year. Then fix the hourly throughput and daily running hours, and check the power and fuel available at site for steam.
Can I buy a single machine instead of a complete cattle feed line?
Yes. Individual machines are supplied to start a small line, add capacity, or replace equipment in an existing feed mill. Tell us what you already run so the new machine is matched to it.
Where are spares held, and how quickly is service provided?
Spares for the machinery are held in Lagos and Kano in Nigeria and in Accra in Ghana. Every enquiry gets a reply within 24 hours, and service is provided within 48 hours.
What warranty comes with the machinery?
Machinery is covered for 12 months against any manufacturing defect.
Can KAV install and commission a cattle feed processing plant and train our operators?
Yes. KAV coordinates installation, commissioning and operator training for the cattle feed plant, followed by after-sales service, maintenance support and spare parts.
Can KAV prepare a feasibility study or project report for a cattle feed processing plant?
Yes. KAV prepares feasibility studies and project reports for cattle feed plant projects, which feed producers can use when approaching banks, investors or development programmes. Share your formulation, target output and running hours to start.
In which African countries does KAV work on cattle feed processing plant projects?
KAV works with cattle feed processing plant buyers across 54 African markets, with local offices in Accra (Ghana) and Kano (Nigeria) and spare parts held in Lagos, Kano and Accra.
Does KAV also supply poultry and fish feed plants?
Yes. See the poultry feed plant page for mash, pellet, crumble and extruded poultry feed, and the fish feed plant page for sinking and floating fish feed.
What should I send with a cattle feed plant enquiry?
Send the animals you feed, the feed forms you want, your formulation and main raw materials, the output per hour and daily running hours, the utilities at site and the project location. Say whether you need a complete line or individual machines. To start, request a quote.
What equipment is in a cattle feed processing plant?
The line typically includes Raw-material intake hopper and pre-cleaning screen, Bucket elevators and conveyors, Hammer mill, Batching scales, Feed mixer with molasses addition, Steam conditioner, Pellet mill, Pellet cooler, Rotary screener Packing scale and bag-closing machine, and 3 more. The final list is set in the technical proposal for your raw material and capacity.
What are the main process steps in a cattle feed processing plant?
The process runs in 7 main steps: Raw-Material Intake & Cleaning → Grinding → Batching & Mixing → Steam Conditioning → Pelleting → Cooling & Screening → Bagging.
Where is the output of a cattle feed processing plant used?
Dairy cattle feed production, Beef and fattening (feedlot) cattle feed, Calf starter and grower feed, Sheep and goat (small ruminant) feed, On-farm feed production for dairy farms and ranches and Commercial feed mills supplying livestock farmers.
How much does a cattle feed processing plant cost?
The price of a cattle feed processing plant depends on capacity, raw material, automation, material of construction and the scope of supply. Share your raw material, target output, operating hours and site location, and KAV will scope it in a technical proposal.

Ready to discuss your project?

Call or email Kadali Africa Ventures with your raw material, target product and capacity.

Get A Free Quote