Skip to main content
Eucalyptus Oil Distillation Plants
Essential Oils, Spices & Oleoresins

Eucalyptus Oil Distillation Plants

A eucalyptus oil distillation plant recovers essential oil from eucalyptus leaves by steam distillation, leaving the oil and an aromatic hydrosol.

Representative extraction and distillation equipment, shown as an illustration; not a photograph of a plant built for this product

Eucalyptus Oil Distillation Plants

The species decides the oil: Eucalyptus globulus and Eucalyptus radiata give cineole-rich oils (1,8-cineole, also called eucalyptol), while Eucalyptus citriodora gives a lemon-scented oil. Leaves are handled fresh or partly dried, so the plant is built around the leaf supply, how long leaves wait before distillation, and the oil grade buyers ask for. A buyer should settle the species and leaf supply, the target grade, the boiler fuel and the cooling water on site before the still size is fixed.

Leaves are received, cleaned of twigs and foreign matter and, where needed, size-reduced so that oil is released evenly. The leaf charge is loaded into a stainless-steel still and steam is passed through it, carrying the volatile oil out. The vapour is condensed in a multi-tube condenser with chilled or cooling water, and the condensate flows to a Florentine flask, where the oil separates from the water. The oil is drawn off, polish-filtered and dried to remove the last water, and the hydrosol can be recovered as a second product. Steam distillation is the route listed for these leaves, and hydro, vacuum or pressure modes can be evaluated during process development for the target oil. Each batch is checked by gas chromatography, including the 1,8-cineole content where a cineole grade is sold, and for physical properties such as specific gravity, refractive index and optical rotation. Spent leaf leaves the still in volume and needs an outlet, such as mulch or boiler fuel.

Eucalyptus Oil Distillation Plants at a glance

Raw material
Eucalyptus leaves: Eucalyptus globulus, Eucalyptus radiata or Eucalyptus citriodora
Plant outputs
Eucalyptus globulus or radiata oil; High-cineole eucalyptus oil (where specified); Lemon-scented eucalyptus (citriodora) oil; Eucalyptus hydrosol; Spent leaf for mulch or boiler fuel
Process route
Leaf reception and cleaning → Size reduction (where required) → Charging and steam distillation → Condensation → Oil and water separation → Polishing and drying → Testing and packing
Main uses
Pharmaceutical topical products and liniments; Cosmetics and personal care; Aromatherapy and wellness products
Supplied to
Processors across Africa, from the Kadali Africa Ventures offices in Accra (Ghana) and Kano (Nigeria)
To get a proposal
Send your raw material, target product, capacity and country; every enquiry gets a reply within 24 hours

Technical Specifications

Raw MaterialEucalyptus leaves: Eucalyptus globulus, Eucalyptus radiata or Eucalyptus citriodora
Feed FormFresh or partly dried leaves, size-reduced where required
Distillation MethodSteam distillation; hydro, vacuum or pressure modes evaluated in process development
Product-Contact MaterialStainless steel
CondensationMulti-tube condenser with chilled or cooling water
Oil-Water SeparationStainless-steel Florentine flask
FinishingPolish filtration; drying over anhydrous sodium sulphate or under vacuum
Quality CheckGas chromatography profile, including 1,8-cineole where specified; specific gravity, refractive index, optical rotation
AutomationPLC-based control
Plant CapacityConfigurable based on process requirement
UtilitiesSteam (boiler), chilled or cooling water, compressed air and power, confirmed for each project

Typical Process Route

  1. 1Leaf reception and cleaning
  2. 2Size reduction (where required)
  3. 3Charging and steam distillation
  4. 4Condensation
  5. 5Oil and water separation
  6. 6Polishing and drying
  7. 7Testing and packing
1

Leaf reception and cleaning

Eucalyptus leaves are weighed, inspected and cleaned of twigs, soil and foreign matter. Whether leaves are distilled fresh or partly dried is set for the species and the oil.

2

Size reduction (where required)

Leaves can be reduced in size so that oil is released evenly during distillation.

3

Charging and steam distillation

The leaf charge is loaded into a stainless-steel still and steam passes through it; the mode and run time are set during process development for the target oil.

4

Condensation

The vapour is condensed in a multi-tube condenser with chilled or cooling water, limiting the loss of volatile top notes.

5

Oil and water separation

Condensate settles in a stainless-steel Florentine flask; the oil is collected and the hydrosol drawn off.

6

Polishing and drying

The crude oil is polish-filtered and dried over anhydrous sodium sulphate or under vacuum.

7

Testing and packing

Each batch is checked by gas chromatography, including 1,8-cineole where specified, and for physical properties, then packed.

Process & Equipment Modules

  • Leaf reception, cleaning and sorting
  • Size-reduction unit (where required)
  • Stainless-steel distillation still
  • Steam boiler
  • Multi-tube condenser with chilled or cooling water
  • Stainless-steel Florentine flask (oil-water separator)
  • Polish filtration unit
  • Oil drying unit
  • Oil storage and packing
  • PLC control panel and instruments

Plant Output

Eucalyptus globulus or radiata oilHigh-cineole eucalyptus oil (where specified)Lemon-scented eucalyptus (citriodora) oilEucalyptus hydrosolSpent leaf for mulch or boiler fuel

Applications

  • Pharmaceutical topical products and liniments
  • Cosmetics and personal care
  • Aromatherapy and wellness products
  • Perfumery and home fragrance
  • Insect repellents and household cleaning products
  • Food flavouring where permitted
  • Export trade in essential oils

Key Features

  • Species-Specific Oils

    The same route serves cineole-rich globulus and radiata oils and lemon-scented citriodora oil, with settings chosen for each.

  • Cineole Grade Option

    The plant can be set up to produce a high-cineole grade where buyers ask for it; the grade is fixed during process development.

  • Stainless-Steel Product Contact

    Still, condenser and Florentine flask are stainless steel, protecting oil quality.

  • Efficient Condensation

    A multi-tube condenser with chilled or cooling water condenses the oil and hydrosol and limits loss of volatile notes.

  • Hydrosol Recovery

    The aromatic water can be drawn off and sold as a second product.

Frequently Asked Questions

Who supplies eucalyptus oil distillation plants in Africa?
Kadali Africa Ventures (KAV) prepares technical proposals and quotations for eucalyptus oil distillation plants for processors across Africa, with the scope confirmed in the technical proposal. KAV has local offices in Accra (Ghana) and Kano (Nigeria) and holds spare parts in Lagos, Kano and Accra.
What local support does KAV provide for an eucalyptus oil distillation plant?
For an eucalyptus oil distillation plant, KAV replies to enquiries within 24 hours, provides service within 48 hours, holds spare parts in Lagos, Kano and Accra, and covers the machinery with a 12-month warranty against manufacturing defects.
Can KAV install and commission an eucalyptus oil distillation plant and train our operators?
Yes. KAV coordinates installation, commissioning and operator training for the eucalyptus oil distillation plant, followed by after-sales service, maintenance support and spare parts.
Can KAV prepare a feasibility study or project report for an eucalyptus oil distillation plant?
Yes. KAV prepares feasibility studies and project reports for eucalyptus oil distillation plant projects, which processors can use when approaching banks, investors or development programmes. Share your raw material, target product and capacity to start.
In which African countries does KAV work on eucalyptus oil distillation plant projects?
KAV works with eucalyptus oil distillation plant buyers across 54 African markets, with local offices in Accra (Ghana) and Kano (Nigeria) and spare parts held in Lagos, Kano and Accra.
What information is needed to size a eucalyptus oil distillation plant?
The species, the tonnes of leaf available per day and across the year, whether leaves arrive fresh or partly dried, the oil grade your buyers want, and the boiler fuel and cooling water on site. The still size and number of stills follow from the daily leaf volume and the batch time set during process development.
Which eucalyptus species should I distil?
It depends on the oil you will sell. Eucalyptus globulus and Eucalyptus radiata give cineole-rich oils, and Eucalyptus citriodora gives a lemon-scented oil. Confirm the species your buyers' specification requires before the plant is configured.
Can the plant make a high-cineole grade?
It can be set up for a high-cineole grade where buyers ask for one. The grade depends on the species and the leaves, and it is fixed during process development and confirmed by testing each batch.
What capacity can the plant have?
Capacity is configured to your leaf supply and the volume your buyers will take, starting from pilot scale. No standard capacity is stated here; a trial on your own leaves is the safest basis for sizing.
How do I request a proposal for a Eucalyptus Oil Distillation Plant?
Use the Request a Quote page and describe your project: the species, leaf volumes and season, the oil grade and your site utilities. For other leaves and grasses see lemongrass and citronella oil distillation plants and essential oil distillation plants.
What does an eucalyptus oil distillation plant produce?
An eucalyptus oil distillation plant produces Eucalyptus globulus or radiata oil, High-cineole eucalyptus oil (where specified), Lemon-scented eucalyptus (citriodora) oil, Eucalyptus hydrosol and Spent leaf for mulch or boiler fuel.
What equipment is in an eucalyptus oil distillation plant?
The line typically includes Leaf reception, cleaning and sorting, Size-reduction unit (where required), Stainless-steel distillation still, Steam boiler, Multi-tube condenser with chilled or cooling water, Stainless-steel Florentine flask (oil-water separator), Polish filtration unit, Oil drying unit, Oil storage and packing and PLC control panel and instruments. The final list is set in the technical proposal for your raw material and capacity.
What are the main process steps in an eucalyptus oil distillation plant?
The process runs in 7 main steps: Leaf reception and cleaning → Size reduction (where required) → Charging and steam distillation → Condensation → Oil and water separation → Polishing and drying → Testing and packing.
Where is the output of an eucalyptus oil distillation plant used?
Pharmaceutical topical products and liniments, Cosmetics and personal care, Aromatherapy and wellness products, Perfumery and home fragrance, Insect repellents and household cleaning products Food flavouring where permitted, and 1 more.
What material is an eucalyptus oil distillation plant made of?
Stainless steel.
How much does an eucalyptus oil distillation plant cost?
The price of an eucalyptus oil distillation plant depends on capacity, raw material, automation, material of construction and the scope of supply. Share your raw material, target output, operating hours and site location, and KAV will scope it in a technical proposal.

Enquire about Eucalyptus Oil Distillation Plants

Send your raw material, target product and capacity to Kadali Africa Ventures for a technical proposal.