Skip to main content
Fish Feed Plant
Starch, Flour, Edible Oil & Food Processing

Fish Feed Plant

Part of the Kadali Africa Ventures catalogue. Send your raw material, target product and capacity for a technical proposal. Request a quote →

Fish Feed Plant Starch, Flour, Edible Oil & Food Processing

Fish Feed Plant

Kadali Africa Ventures supplies fish feed processing plants and machinery to buyers across Africa, for floating (extruded) and sinking (pelleted) feed for catfish, tilapia and other farmed fish. We supply complete turnkey feed lines, from design to commissioning, as well as individual machines to start, expand or upgrade an existing feed mill. Plant capacity is configured to your formulation, throughput and running hours, and spares for the machinery are held in Lagos and Kano (Nigeria) and Accra (Ghana).

A fish feed line receives and cleans raw materials such as fish meal, soybean meal, groundnut cake, maize, brans, oils, vitamins and minerals, and grinds them finer than for poultry or cattle feed, because small, uniform particles give a stable pellet in water. The ground ingredients are batched and mixed to formulation. Floating feed is made by preconditioning the mix and expanding it in an extruder, then drying and cooling it so it floats and holds its shape; sinking feed is made by conditioning the mix with steam and pressing it in a pellet mill. Oil can be coated onto the feed after drying, and the feed is screened and bagged. Floating feed lets the farmer see the fish eat, which helps avoid overfeeding and waste. Every enquiry gets a reply within 24 hours, service is provided within 48 hours, and machinery carries a 12-month warranty against any manufacturing defect.

Fish Feed Plant at a glance

Raw material
Floating (extruded) and sinking (pelleted) feed
Plant outputs
Floating (extruded) fish feed; Sinking (pelleted) fish feed; Fingerling and starter feed; Grow-out feed
Process route
Raw-Material Intake & Cleaning → Fine Grinding → Batching & Mixing → Conditioning → Extrusion or Pelleting → Drying, Coating & Cooling → Screening & Bagging
Main uses
Floating catfish feed production; Tilapia feed production; Fingerling and starter feed
Supplied to
Processors across Africa, from the Kadali Africa Ventures offices in Accra (Ghana) and Kano (Nigeria)
To get a proposal
Send your raw material, target product, capacity and country; every enquiry gets a reply within 24 hours

Technical Specifications

ProductFish Feed Processing Plant & Equipment
Feed FormsFloating (extruded) and sinking (pelleted) feed
Scope of SupplyComplete turnkey lines (design to commissioning) or individual machines
Raw MaterialsFish meal, soybean meal, cakes, grains, brans, oils, vitamins and minerals as per your formulation
Process ModulesRaw-material intake and cleaning, fine grinding, batching and mixing, conditioning, extrusion or pelleting, drying, oil coating, cooling, screening, bagging
Plant CapacityConfigurable based on process requirement
UtilitiesPower and steam; configurable based on process requirement
AutomationConfigurable based on process requirement
Spares SupportSpares held in Lagos and Kano (Nigeria) and Accra (Ghana)
Response & ServiceReply within 24 hours; service within 48 hours
Warranty12 months against any manufacturing defect

Typical Process Route

  1. 1Raw-Material Intake & Cleaning
  2. 2Fine Grinding
  3. 3Batching & Mixing
  4. 4Conditioning
  5. 5Extrusion or Pelleting
  6. 6Drying, Coating & Cooling
  7. 7Screening & Bagging
1

Raw-Material Intake & Cleaning

Fish meal, soybean meal, cakes, grains, brans and other formulation ingredients are received, checked for moisture and cleaned of foreign matter before storage and milling.

2

Fine Grinding

A pulverizer or fine hammer mill grinds the ingredients to a fine, uniform particle size, which fish feed needs to stay stable in water.

3

Batching & Mixing

Ingredients, vitamins and minerals are weighed to the formulation and mixed until uniform.

4

Conditioning

The mix is moistened and heated ahead of the extruder or pellet mill.

5

Extrusion or Pelleting

For floating feed, the extruder expands the mix as it leaves the die; for sinking feed, the pellet mill presses the conditioned mix into pellets.

6

Drying, Coating & Cooling

Extruded feed is dried to a storable moisture, oil can be coated onto the feed, and the feed is cooled.

7

Screening & Bagging

A screener removes fines, which are returned to the line, and the finished feed is weighed and bagged for dispatch.

Major Plant Equipment

  • Raw-material intake hopper and pre-cleaning screen
  • Bucket elevators and conveyors
  • Pulverizer or fine hammer mill
  • Batching scales
  • Feed mixer
  • Preconditioner
  • Fish feed extruder (floating feed)
  • Pellet mill (sinking feed)
  • Dryer
  • Oil coating machine
  • Cooler
  • Rotary screener
  • Packing scale and bag-closing machine
  • Dust collection system (cyclone and bag filter)
  • Steam boiler
  • Electrical control panel

Plant Output

Floating (extruded) fish feedSinking (pelleted) fish feedFingerling and starter feedGrow-out feed

Applications

  • Floating catfish feed production
  • Tilapia feed production
  • Fingerling and starter feed
  • Grow-out feed for fish farms
  • On-farm feed production for fish farms and hatcheries
  • Commercial feed mills supplying fish farmers

Key Features

  • Floating and Sinking Feed

    One supplier for extruded floating feed and pelleted sinking feed, either as separate lines or as one line that makes both.

  • Complete Line or Individual Machines

    Take a turnkey feed line from design to commissioning, or buy only the machines you need, such as an extruder, dryer or pulverizer.

  • Fine Grinding for Water Stability

    Fine, uniform grinding ahead of extrusion or pelleting helps the feed hold together in water.

  • Spares Held in Lagos, Kano and Accra

    Spares for the machinery are stocked in Nigeria and Ghana, so replacement parts do not have to wait for an overseas shipment.

  • 24-Hour Reply, 48-Hour Service

    Every enquiry gets a reply within 24 hours, and service is provided within 48 hours.

  • 12-Month Warranty

    Machinery is covered for 12 months against any manufacturing defect.

Frequently Asked Questions

Who supplies fish feed plants in Nigeria and Ghana?
Kadali Africa Ventures (KAV) supplies fish feed processing plants and machinery, including floating fish feed extruders, to buyers across Africa, as complete turnkey lines or individual machines. KAV has local offices in Accra (Ghana) and Kano (Nigeria) and holds spare parts in Lagos, Kano and Accra.
Does Kadali Africa Ventures supply complete fish feed plants?
Yes. We supply complete turnkey fish feed lines, from design to commissioning, for floating and sinking feed. We also supply individual machines if you only need part of a line.
What is the difference between floating and sinking fish feed?
Floating feed is made in an extruder, which expands the mix so the pellets float; it lets the farmer see the fish eat and helps avoid overfeeding. Sinking feed is made in a pellet mill and suits fish that feed at the bottom. Catfish and tilapia farmers commonly use floating feed.
What capacity of fish feed plant can you supply?
Capacity is configured to your requirement. Send your target output per hour, the hours the mill will run each day, the pellet sizes and whether you want floating or sinking feed, and the line is sized to that.
Which raw materials go into fish feed?
Typical ingredients include fish meal, soybean meal, groundnut cake, maize and other grains, brans, oils, vitamins and minerals. The formulation for each species and growth stage shapes the grinding, mixing and coating sections.
Why does fish feed need finer grinding than other feeds?
Fish feed has to hold together in water. Fine, uniform particles bind better in the extruder or pellet mill, so the feed stays stable in water for longer and less is lost to the pond.
Can I buy a single machine instead of a complete fish feed line?
Yes. Individual machines are supplied to start a small line, add capacity, or replace equipment in an existing feed mill. Tell us what you already run so the new machine is matched to it.
Where are spares held, and how quickly is service provided?
Spares for the machinery are held in Lagos and Kano in Nigeria and in Accra in Ghana. Every enquiry gets a reply within 24 hours, and service is provided within 48 hours.
What warranty comes with the machinery?
Machinery is covered for 12 months against any manufacturing defect.
Can KAV install and commission a fish feed processing plant and train our operators?
Yes. KAV coordinates installation, commissioning and operator training for the fish feed plant, followed by after-sales service, maintenance support and spare parts.
Can KAV prepare a feasibility study or project report for a fish feed processing plant?
Yes. KAV prepares feasibility studies and project reports for fish feed plant projects, which feed producers can use when approaching banks, investors or development programmes. Share your formulation, target output and running hours to start.
In which African countries does KAV work on fish feed processing plant projects?
KAV works with fish feed processing plant buyers across 54 African markets, with local offices in Accra (Ghana) and Kano (Nigeria) and spare parts held in Lagos, Kano and Accra.
Does KAV also supply poultry and cattle feed plants?
Yes. See the poultry feed plant page for mash, pellet, crumble and extruded poultry feed, and the cattle feed plant page for mash and pelleted cattle feed.
What should I send with a fish feed plant enquiry?
Send the fish species and growth stages, floating or sinking feed, the pellet sizes, your formulation and main raw materials, the output per hour and daily running hours, the utilities at site and the project location. Say whether you need a complete line or individual machines. To start, request a quote.
What does a fish feed processing plant produce?
A fish feed processing plant produces Floating (extruded) fish feed, Sinking (pelleted) fish feed, Fingerling and starter feed and Grow-out feed.
What equipment is in a fish feed processing plant?
The line typically includes Raw-material intake hopper and pre-cleaning screen, Bucket elevators and conveyors, Pulverizer or fine hammer mill, Batching scales, Feed mixer, Preconditioner, Fish feed extruder (floating feed), Pellet mill (sinking feed), Dryer Oil coating machine, and 6 more. The final list is set in the technical proposal for your raw material and capacity.
What are the main process steps in a fish feed processing plant?
The process runs in 7 main steps: Raw-Material Intake & Cleaning → Fine Grinding → Batching & Mixing → Conditioning → Extrusion or Pelleting → Drying, Coating & Cooling → Screening & Bagging.
Where is the output of a fish feed processing plant used?
Floating catfish feed production, Tilapia feed production, Fingerling and starter feed, Grow-out feed for fish farms, On-farm feed production for fish farms and hatcheries and Commercial feed mills supplying fish farmers.
How much does a fish feed processing plant cost?
The price of a fish feed processing plant depends on capacity, raw material, automation, material of construction and the scope of supply. Share your raw material, target output, operating hours and site location, and KAV will scope it in a technical proposal.

Ready to discuss your project?

Call or email Kadali Africa Ventures with your raw material, target product and capacity.

Get A Free Quote