Skip to main content
Oil Expellers & Cold-Press Oil Mills
Cocoa, Shea, Palm Oil & Oilseed Processing

Oil Expellers & Cold-Press Oil Mills

An oil expeller or cold-press oil mill presses edible oil out of oilseeds and nuts with a screw press, leaving oil and a press cake.

Representative oilseed processing equipment, shown as an illustration; not a photograph of the listed press

Oil Expellers & Cold-Press Oil Mills

Expeller pressing usually conditions or warms the seed to release more oil; cold pressing keeps the temperature low to make a virgin oil with more of its natural flavour and colour, at a lower yield. The same route serves groundnut, sesame, sunflower, soybean, coconut copra and other oilseeds. Kadali's Africa Market brochure lists expeller oil and peanut butter lines among its groundnut products. A buyer should settle the seed and its supply, whether the oil is sold cold-pressed, expeller-pressed or refined, and how the press cake will be sold.

Seed is cleaned of stones, dust and metal, because they wear the press. Some seeds are dehulled or decorticated first. For expeller pressing the seed may be conditioned or warmed, which helps the oil flow; for cold pressing it is pressed without added heat. The screw press squeezes the seed against a barrel, oil runs out through the gaps and the cake leaves at the end. The crude oil carries fine solids, so it is settled and filtered, often through a filter press, before packing. Cold-pressed oil is usually only filtered; expeller oil may go on to refining. Press cake still holds some oil and protein and is sold as animal feed, or extracted further where volumes justify it. Capacity and scope are confirmed in the technical proposal.

Oil Expellers & Cold-Press Oil Mills at a glance

Raw material
Groundnut, sesame, sunflower, soybean, coconut copra and other oilseeds and nuts
Plant outputs
Cold-pressed oil; Expeller-pressed crude oil; Press cake
Process route
Cleaning → Dehulling (where needed) → Conditioning or cold feed → Pressing → Settling and filtration → Packing
Main uses
Groundnut oil; Sesame oil; Sunflower oil
Supplied to
Processors across Africa, from the Kadali Africa Ventures offices in Accra (Ghana) and Kano (Nigeria)
To get a proposal
Send your raw material, target product, capacity and country; every enquiry gets a reply within 24 hours

Technical Specifications

Raw MaterialGroundnut, sesame, sunflower, soybean, coconut copra and other oilseeds and nuts
PressingScrew press (expeller), cold or with conditioning
Oil ClarificationSettling and filtration, for example in a filter press
ProductsCold-pressed or expeller-pressed oil; press cake
Plant CapacityConfigurable based on process requirement
UtilitiesPower; heat where conditioning is used; confirmed for each project

Typical Process Route

  1. 1Cleaning
  2. 2Dehulling (where needed)
  3. 3Conditioning or cold feed
  4. 4Pressing
  5. 5Settling and filtration
  6. 6Packing
1

Cleaning

Seed is cleaned of stones, dust and metal to protect the press.

2

Dehulling (where needed)

Groundnut, sunflower or sesame may be dehulled or decorticated.

3

Conditioning or cold feed

For expeller pressing the seed may be warmed; for cold pressing it is fed without added heat.

4

Pressing

A screw press separates oil from the press cake.

5

Settling and filtration

Crude oil is settled and filtered to remove fine solids.

6

Packing

Oil is packed in bottles, jerrycans or drums; cake is bagged.

Process & Equipment Modules

  • Seed cleaner
  • Decorticator or dehuller (where needed)
  • Seed conditioner (for expeller pressing)
  • Screw oil press (expeller)
  • Oil settling tank
  • Filter press
  • Oil storage and filling
  • Cake handling

Plant Output

Cold-pressed oilExpeller-pressed crude oilPress cake

Applications

  • Groundnut oil
  • Sesame oil
  • Sunflower oil
  • Soybean oil
  • Coconut oil
  • Cold-pressed speciality oils
  • Press cake for animal feed

Key Features

  • Cold-Pressed or Expeller Oil

    The same press line can make virgin cold-pressed oil or higher-yield expeller oil.

  • Many Oilseeds

    Groundnut, sesame, sunflower, soybean, coconut and others.

  • Clean, Filtered Oil

    Settling and filtration remove fine solids before packing.

  • Saleable Press Cake

    Cake leaves the press ready to bag as feed.

Frequently Asked Questions

Who supplies oil expellers and cold-press oil mills in Nigeria and Ghana?
Kadali Africa Ventures (KAV) prepares technical proposals and quotations for oil expellers and cold-press oil mills for processors across Africa, and quotes expeller and cold-press machines at general market prices. KAV has local offices in Accra (Ghana) and Kano (Nigeria) and holds spare parts in Lagos, Kano and Accra.
What local support does KAV provide for an oil expellers & cold-press oil mill?
For an oil expellers & cold-press oil mill, KAV replies to enquiries within 24 hours, provides service within 48 hours, holds spare parts in Lagos, Kano and Accra, and covers the machinery with a 12-month warranty against manufacturing defects.
Can KAV install and commission an oil expellers & cold-press oil mill and train our operators?
Yes. KAV coordinates installation, commissioning and operator training for the oil expeller and cold-press oil mill, followed by after-sales service, maintenance support and spare parts.
Can KAV prepare a feasibility study or project report for an oil expellers & cold-press oil mill?
Yes. KAV prepares feasibility studies and project reports for oil expeller and cold-press oil mill projects, which processors can use when approaching banks, investors or development programmes. Share your raw-material supply, target product and capacity to start.
In which African countries does KAV work on oil expellers & cold-press oil mill projects?
KAV works with oil expellers & cold-press oil mill buyers across 54 African markets, with local offices in Accra (Ghana) and Kano (Nigeria) and spare parts held in Lagos, Kano and Accra.
What is the difference between cold-pressed and expeller oil?
Both are made in a screw press. Cold-pressed oil is pressed without added heat and keeps more of its natural flavour and colour, but less oil is recovered. Expeller pressing usually conditions the seed to recover more oil, and the oil is often refined afterwards.
Which oilseeds can one press handle?
A screw press can usually be set up for several oilseeds, such as groundnut, sesame, sunflower and soybean, but the press settings and preparation differ. Tell us the seeds you will process.
What happens to the press cake?
It still holds some oil and protein and is usually sold as animal feed. Where volumes are large, the remaining oil can be recovered by extraction.
Does the oil need refining?
Cold-pressed oil is normally only settled and filtered. Expeller oil sold as cooking oil is often refined; see edible oil filtration and refining systems.
Which crop pages should I read?
See groundnut oil, sesame oil, sunflower oil and coconut oil processing plants.
How do I request a proposal?
Use the Request a Quote page and give the seed, the tonnes per day, whether you want cold-pressed or expeller oil, and your site utilities.
What does an oil expellers & cold-press oil mill produce?
An oil expellers & cold-press oil mill produces Cold-pressed oil, Expeller-pressed crude oil and Press cake.
What equipment is in an oil expellers & cold-press oil mill?
The line typically includes Seed cleaner, Decorticator or dehuller (where needed), Seed conditioner (for expeller pressing), Screw oil press (expeller), Oil settling tank, Filter press, Oil storage and filling and Cake handling. The final list is set in the technical proposal for your raw material and capacity.
What are the main process steps in an oil expellers & cold-press oil mill?
The process runs in 6 main steps: Cleaning → Dehulling (where needed) → Conditioning or cold feed → Pressing → Settling and filtration → Packing.
Where is the output of an oil expellers & cold-press oil mill used?
Groundnut oil, Sesame oil, Sunflower oil, Soybean oil, Coconut oil Cold-pressed speciality oils, and 1 more.
What capacity can an oil expellers & cold-press oil mill have?
Configurable based on process requirement. The plant is sized to your raw material, throughput and operating hours in the technical proposal.
How much does an oil expellers & cold-press oil mill cost?
The price of an oil expellers & cold-press oil mill depends on capacity, raw material, automation, material of construction and the scope of supply. Share your raw material, target output, operating hours and site location, and KAV will scope it in a technical proposal.

Enquire about Oil Expellers & Cold-Press Oil Mills

Send your raw material, target product and capacity to Kadali Africa Ventures for a technical proposal.